ENERGY SOLUTIONS

Infrared Motion Sensor Switch

The product is a new energy- saving switch.
It is an infrared sensitivity detector - range 6-12 meters.
It senses the movement of body automatically to switch ON and switch OFF the load connected to it.
The wide detection range of 120°, 180° & 360° are made up of up and down, left and right service field. Ceiling mounted and wall mounted models are available as suitable.
It can identify automatically day and night -<3Lux – 2000Lux.
You can adjust ambient light, set time delay 8sec –7mnt.
Very Substantial Energy Saving possibilities exists.

Application :
Security Areas – Executive Cabins – Conference Rooms
Not Frequently Used Corridors & Sheds – Toilets etc.etc.

AUTOMATION

ECO Smart Energy Saver
- Intelligent active load monitor and energy manager with variable LOW LOSS inductance in the circuit
- Dynamic regulation of V(o), no impact on V(i) variations
- Based on Australian Technical know-how.
- Best suited for Hospitals, Homes, Restaurants, Commercial Buildings, Industries, etc.,
- Micro processor based unit, based on 4th generation SDO * Technology for DEMAND SIDE MGMT (DSM)
- Available in 1-Ph & 3-Ph models, 3KVA and above.
- Developed, Tested and Proven device of EEDPL
ECO – LITECON
Microprocessor controller for cluster of lights, saves 25%-40% in electricity bills
Standard models with built in time sequence.
Customization on request.
3 types of standard models are available
Mark-1 Operates on two modes.
(a) Energy Save – During peak traffic
delivers optimum energy to the load
(b) Dimming – During non-peak hours

ECO LITECON.. (Contd)
MARK II
Energy saving mode only for mixed loads with multiple ON/OFF switching
12 pre-programmable ON/OFF switching
Starts on ES-mode
12 cycles for breaks
MARK III
A reliable timer for ON/OFF operations.
Best suited for centralized control of lights
Saves upto 30%
Available in S/Ph & 3 Ph, for 3 KVA and above

ECO Watch Saver
A micro processor unit with infra red sensors.
MK - I for offices: Senses no. of people occupying the room and controls power automatically.
MK - II for AC’s: maintains higher set-back temperature when office not fully occupied, but reverts to normal settings when you are present.
MK - III: maintains light, temperature and air in the hall depending upon the no. of persons present.
Connectivity to centralized computer(optional)
Saves energy 15% to 30%.
E T r A C S
Energy Tracking and Control system
Basically a software cum hardware unit
Enables a centralized PC compatible control of a large contingent of distribution network through:
- Switching Module
- Dimming Module
- Metering Module
- Data acquisition Module
System houses a PC, the software, the hardware and the open ended data cable from module to module
Operates within 3.0 km radius range(Extendable with
repeaters)
Can do the job of a Manager and save upto 30%

E T r A C S …. (Contd)
Best suited for :
- Street lights in large & medium cities and
Municipalities
- Industrial complexes having large
network of external lighting like
Peripheral/yard/township lighting
- Large scale Energy saving (35% - 40%) in the above
- MIS for Utilities Managers
- Centralized Control of various electrical loads
- Remote Energy Metering

ETracs -for Energy Management Solutions
Provides information to manage energy consumption
-load profiling
Identifies and corrects power quality problems
-Power quality monitoring
-Power system control
Limits energy consumption
-demand management
Protects major capital instruments
-Emergency load shedding
Helps make informed decisions
Identify power quality problems
Reduce demand charges
Defer capital equipment costs
Reduce wasted energy

Solutions for Remote Lighting and Power controls Control
On/Off Control
Dimming Control
Alternate Light On/Off
Maintenance scheduling
ETrACS is an energy tracking and control system which can be very efficiently used for REMOTE tracking, monitoring and operation of Out Door Lights.

Top

POWER OPTIMISATION SYSTEMS “Savings through Power Quality”

We are pleased to introduce “Electroflow” an internationally renowned, state of art energy saving and power conditioning system with proven performance and satisfied customers across six continents.

ElectroFlow is the only integrated modular system in the world specifically custom-engineered to effectively and economically optimize power quality with guaranteed electric savings of up to 34%,without any disruptions to equipments or machinery. It is a versatile solution, available for various load sizes ranging from 100KW to 300000 KW.

How Does It Work ?
It is an integrated system consisting of multi-stage LRC tank circuits. It is the only system on the world that uses Variable Non-Saturable Zigzag Reactors to provide energy savings through enhancement of power quality. When operating in Auto mode, it utilizes the latest technology in high speed monitoring of electrical parameters such as: Voltage, Current, Harmonics, and Power Factor.
Based on pre-adjusted parameters unique to each facility, Electroflo Regulator activates appropriate internal stages in a “Ladder Logic” response, until the pre-set values are reached. It is equipped with a unique alarm-driven Self Diagnostic Features(SDF), which automatically identifies components status/failure on per-phase and per-stage basis.
Electroflo is assembled using the highest quality of industrial-grade parts and components, and is extremely reliable and virtually maintenance free, with a 20-years nominal life expectancy. Standard model is triple protected, and primarily connects in parallel, hence it is guaranteed to be fail safe. Each stage is independently protected, monitored and activated, resulting in simultaneous addressing of multiple problems and functions. This eliminates the need to purchase a number of different devices, in various packaging, to correct each anomaly; which may adversely interact with each other, or the load.

Applications
Electroflo is designed to address power quality and electricity savings for industrial, commercial and institutional applications. It can easily be installed for the entire facility and distribution, as well as at individual loads such as computers, electronic equipment, production machinery and others, regardless of the plant’s size, voltage or frequency.

Benefits
Electroflo offers Guaranteed savings of up to 34% through reductions in Kilowatt/KVA Demand and Kilowatt-Hour consumption and related charges, with actual payback period of less than two years, without any disruptions to equipment or machinery. It improves power quality through voltage stability and reduction of harmonics and distortion while protecting equipment and machinery, resulting in reduced maintenance and downtime.

Standard Nominal Features

Optional Features

Voltage Improvement and Stability

Brownout Protection

Three Phase Balancing
Intermittent Supply

Surge and Transient Protection

Failure Protection

Broadband Harmonics Reduction

Specific Harmonics

Power Factor Improvement Filtering

Releasing KVA Capacity Phase Loss Synthesis

We carry out initial audit for ascertaining the type of system required, this will be done by UK trained team.

Top