Suitable for T12/T8/T5 as Retrofit Solution or fitted with New Fixtures
These Energy Efficient Ballasts can be easily replaced with existing conventional choke, you will derive following benefits -
Power Saving 30 - 50%.
Increases tube life by about 70%.
Ballast life is approx 50000 hrs as against 10000 hrs of conventional choke.
Flicker free start and No blackening of walls.
Works at input voltage as low as 70V and as high as 340V.
Payback Period is less than Two Years.
Power Line Quality
Total Harmonics distortion as low as 10%.
Third Harmonics as low as 4%.
Power Factor as high as 0.99.
Two Years Warranty
HID SYSTEM - Metal Halide Lamps & Ballast with Super Imposed Ignitor
We supply a wide range of revolutionary Metal Halide based Venture Uni – form Pulse Start Lamp ballast systems from 50 – 1000 W
The Uni – form Pulse Start system delivers more light with greater energy efficiency with respect to standard metal halide technology and offers upto 50 % improvement in system lumens / watt.
Venture ‘ s formed body arc lamps are combined with our low current crest factor ballasts and pulse start ignitors resulting in greater energy efficiency, higher efficacy, improved color uniformity, longer life and faster warm – up / restike times
We have special MH Lamps with 90 CRI, and suitable for Vibration areas.
One 100 watt standard MH lamp produces same light output as 3 four – foot long high output fluorescent lamps
The following lamps are offered – double – ended, elliptical type, tubular type, G12 & designer colors with suitable ballasts, Super Imposed Ignitor and capacitors
COOLING
ATTRACTIVE FINANCIAL BENEFITS FROM YOUR COOLING TOWERS
The SENSE-TEK CTC is a sophisticated electronic solution with an intelligent sensor to precisely monitor and control water temperature.
The SENSE-TEK CTC stops the fan motor and restart only after the temperature of water increases above a set level. It monitors water temperature from cold water basin by using electronic precision sensor and controls the operation of electrical motor. It switches ON/OFF the fan motor as per your requirement based on temperature settings. The unit is having “OFF hour” meter through which you can monitor the energy saved by you due to our unit on daily basis.
LUMINAIRE
Our company takes special attention to the quality of luminaire, supplied with every Lamp. The Luminaire is just not a simple box containing a Lamp and a Reflector giving a particular type of light distribution. On the Contrary the housing is a very carefully designed structure Incorporating a number of mechanical, thermal and electrical provisions , each of which contributes to its operating efficiency and safety in use and after mounting gives the light distribution and levels needed to satisfy the specification of the users need.
Basic requirement of a Good Luminaire
Provide support, protection and electrical connection to the lamp.
Control the light from the lamps or tube.
Not overheat and must maintain the correct temperature for efficient operation of lamp and control gear.
It should be easy to install and maintain.
Stand up to normal atmospheric conditions or as required.
It should give a pleasing appearance.
It should have an economic selling price.
Comprehensive Harmonic Study & Electrical Power Quality analysis for the locations
Establish ambient illumination at minimum acceptable level
Provide task lighting at the optimum level depending on the difficulty of visual task i.e. use Table Lamp which can give you 800-1000 lux while consuming only 11 Watt of power.
Increase the efficiency of Lamps, Ballasts and Fixtures.
Improve light quality by reducing glare & brightness contrast.
Use day lighting where possible and practical.
Clean fixture, lamps and lenses every 6 – 24 months.
Clean or repaint small rooms every year and larger rooms every 2 to 3 years.
For Optimizing Energy Efficiency and Light Quality
It often pays to redesign the building’s entire lighting system. This can improve lighting quality,make visual tasks easier and Save 50% or more on energy cost. To save power while enhancing light quality, take following steps:
