ENERGY SOLUTIONS

The Luminaire is just not a simple box containing a Lamp and a Reflector giving a particular type of light distribution. On the Contrary the housing is a very carefully designed structure Incorporating a number of mechanical, thermal and electrical provisions , each of which contributes to its operating efficiency and safety in use and after mounting gives the light distribution and levels needed to satisfy the specification of the users need.

Basic requirement of a Good Luminaire

Provide support,protection and electrical connection to the lamp.
Control the light from the lamps or tube.
Not overheat and must maintain the correct temperature for efficient operation of lamp and control gear.
It should be easy to install and maintain.
Stand up to normal atmospheric conditions or as required.
It should give a pleasing appearance.
It should have an economic selling price.

Establish ambient illumination at minimum acceptable level
Provide task lighting at the optimum level depending on the
difficulty of visual task i.e. use Table Lamp which can give you
800-1000 lux while consuming only 11 Watt of power.
Increase the efficiency of Lamps,Ballasts and Fixtures.
Improve light quality by reducing glare & brightness contrast.
Use daylighting where possible and practical.
Clean fixture,lamps and lenses every 6 – 24 months.
Clean or repaint small rooms every year and larger rooms every 2 to 3 years.

For Optimizing Energy Efficiency and Light Quality

It often pays to redesign the building’s entire lighting system. This can improve lighting quality,make visual tasks easier and Save 50% or more on energy cost. To save power while enhancing light quality, take following steps:

Top

Free consultancy available for Energy Conservation in domestic, commercial and industrial sector. Call Mr.A.K.Upadhyay 9891771122

website promotion & seo by: softlogic's & developments